Showing posts with label Engineering. Show all posts
Showing posts with label Engineering. Show all posts

Monday, December 5, 2016

Engineering Fundamentals of the Internal Combustion Engine W Pulkrabek




This book was written to be used as an applied thermoscience textbook in a onesemester, college-level, undergraduate engineering course on internal combustion engines. It provides the material needed for a basic understanding of the operation of internal combustion engines. Students are assumed to have knowledge of fundamental thermodynamics, heat transfer, and fluid mechanics as a prerequisite to get maximum benefit from the text. This book can also be used for self-study and/or as a reference book in the field of engines. Contents include the fundamentals of most types of internal combustion engines, with a major emphasis on reciprocating engines. Both spark ignition and compression ignition engines are covered, as are those operating on four-stroke and two-stroke cycles, and ranging in size from small model airplane engines to the largest stationary engines. Rocket engines and jet engines are not included. Because of the large number of engines that are used in automobiles and other vehicles, a major emphasis isplaced on these. 



Download Link!

Wednesday, July 20, 2016

How Blast Furnace Work

Blast furnace:
The purpose of a blast furnace is to reduce and convert iron oxides into liquid iron called "hot metal".


The blast furnace is a huge, steel stack lined with refractory brick.
Iron ore, coke and limestone are put into the top, and preheated air is blown into the bottom.
IRONE ORE:
Iron ore is a rock that contains iron combined with oxygen. 
Some of the world's highest quality iron ore comes from Australia.
COKE:
• Coke is made from coal. Once mined, the coal is crushed and washed.
• Coal is then baked in coke ovens for about 18 hours.
• During this process, by-products are removed and coke is produced.
FLUX:
• Flux is a term for minerals used to collect impurities during iron and steelmaking.
•  Limestone and dolomite are fluxes.
• The flux causes a chemical reaction and elements not needed for steelmaking join together to form slag.
• 
METHOD:
Three substances are needed to enable to extraction of iron from its ore. The combined mixture is called the charge:
Iron ore, haematite - often contains sand with iron oxide, Fe2O3.
Limestone (calcium carbonate).
Coke - mainly carbon
The charge is placed a giant chimney called a blast furnace. The blast furnace is around 30 metres high and lined with fireproof bricks. Hot air is blasted through the bottom.
BLAST OPERATION:
• The Charge is fed in at the top,
• Bell Doors open (One at a time)
• Coke burns & makes Carbon Monoxide,
• The Carbon Monoxide mixes with the Oxygen in the Iron Ore (leaving Iron),
The Molten Iron falls to the bottom of the Furnace,
The limestone joins with the impurities to make Slag and floats on top of the Molten Iron. The slag and the Molten Iron are tapped off regularly.
Special rail cars bring the Molten Iron away,                                                                                                                     The liquid iron typically flows into a channel and indentations in a bed of sand.
Once it cools, this metal is known as pig iron.
REATIONS:
Oxygen in the air reacts with coke to give carbon dioxide:
C(s) + O 2(g)  CO2(g)
The limestone breaks down to form carbon dioxide:
CaCO3(s)  CO2 (g) + CaO(s)
Carbon dioxide produced in 1 + 2 react with more coke to produce carbon monoxide:
CO2(g) + C(s)  2CO(g)
The carbon monoxide reduces the iron in the ore to give molten iron:
3CO(g) + Fe2O3(s)  2Fe(l) + 3CO2(g)
The limestone from 2, reacts with the sand to form slag (calcium silicate):
CaO(s) + SiO(s)  CaSiO3(l)
WHY PIG IRON IS PIG IRON:
• PIG IRON is raw iron in an ingot form. 
• It is the result of smelting Iron Ore, Coke and Limestone in a blast furnace. 
• It is a hard but brittle mix of iron (90% or more) and carbon (typically 4-5%), manganese, sulfur, phosphorus, and silicon (roughly 3% in total). 
• The name is derived from the time when the iron ran into moulds. A row of moulds was said to resemble a litter of suckling pigs, so the single ingots were referred to as pigs.
• To create a ton of pig Iron
• We start with 2 tons of ore,
• 1 ton of coke and
• ½ ton of limestone.
• The fire consumes 5 tons of air.
• The temperature reaches almost 3000 deg F (about 1600 degrees C) at the core of the blast furnace!
BLAST WASTE:
• Slag, Ammonia, Light Oils and Coal Tars are waste from the Furnace,
• They make raw materials for cements, plastics and fertilisers.
• Pig iron contains 4 percent to 5 percent carbon and is so hard and brittle that it is almost useless.
We do one of two things with pig iron:
• You melt it, mix it with slag and hammer it to eliminate most of the carbon (down to 0.3 percent) and create wrought iron.
Wrought iron is the stuff a blacksmith works with to create tools, horseshoes and so on. When you heat wrought iron, it is malleable, bendable, weldable and very easy to work with. Or we can create steel.

Monday, July 18, 2016

How Earthquake Occurs


What is an earthquake?

An earthquake is what happens when two blocks of the earth suddenly slip past one another. The surface where they slip is called the fault or fault plane. The location below the earth’s surface where the earthquake starts is called thehypocenter, and the location directly above it on the surface of the earth is called the epicenter.
Sometimes an earthquake has foreshocks. These are smaller earthquakes that happen in the same place as the larger earthquake that follows. Scientists can’t tell that an earthquake is a foreshock until the larger earthquake happens. The largest, main earthquake is called the mainshock. Mainshocks always haveaftershocks that follow. These are smaller earthquakes that occur afterwards in the same place as the mainshock. Depending on the size of the mainshock, aftershocks can continue for weeks, months, and even years after the mainshock!

What causes earthquakes and where do they happen?
The earth has four major layers: the inner core, outer core, mantle and crust. The crust and the top of the mantle make up a thin skin on the surface of our planet. But this skin is not all in one piece – it is made up of many pieces like a puzzle covering the surface of the earth.Not only that, but these puzzle pieces keep slowly moving around, sliding past one another and bumping into each other. We call these puzzle piecestectonic plates, and the edges of the plates are called the plate boundaries. The plate boundaries are made up of many faults, and most of the earthquakes around the world occur on these faults. Since the edges of the plates are rough, they get stuck while the rest of the plate keeps moving. Finally, when the plate has moved far enough, the edges unstick on one of the faults and there is an earthquake.

Why does the earth shake when there is an earthquake?
While the edges of faults are stuck together, and the rest of the block is moving, the energy that would normally cause the blocks to slide past one another is being stored up. When the force of the moving blocks finally overcomes thefriction of the jagged edges of the fault and it unsticks, all that stored up energy is released. The energy radiates outward from the fault in all directions in the form of seismic waves like ripples on a pond. The seismic waves shake the earth as they move through it, and when the waves reach the earth’s surface, they shake the ground and anything on it, like our houses and us!

How are earthquakes recorded?
Earthquakes are recorded by instruments called seismographs. The recording they make is called a seismogram. The seismograph has a base that sets firmly in the ground, and a heavy weight that hangs free. When an earthquake causes the ground to shake, the base of the seismograph shakes too, but the hanging weight does not. Instead the spring or string that it is hanging from absorbs all the movement. The difference in position between the shaking part of the seismograph and the motionless part is what is recorded.

Friday, July 1, 2016

Google AdSense Urdu Book

Google AdSense Urdu Book read online or Google AdSense Urdu Book in PDF format, first time in Pakistan you can learnGoogle AdSense in Urdu Language through Urdu PDF book, Google AdSense Urdu Book will teach you all aspects and features of Google AdSense in Urdu language. This book will guide you how to approve Google AdSense account easily in Pakistan, It will also instruct you about how to avoid bad and AdSense policy violation approaches. why your AdSense account suspended? How to improve your earnings in Google AdSense, this type of all questions will be answered in Google AdSense Urdu Book.

                                               

  To download click on the link given below:

             DOWNLOAD LINK!

Dynamic HTML in Urdu Book

Read online or download Dynamic HTML Urdu Book, learn Html in Urdu language and become HTML expert. You can learn Html from beginner to advance step by step in less than 10 days very easily because this is a very detailed Html Urdu course.

HTML is stands for Hyper-Text Markup Language used for making web pages using CSS and PHP. HTML is initial and basic course for web designing. If you want to become a web developer than you have to learn HTML first because you can not proceed to other courses of web developing without HTML. The HTML language is very easy.

                                                        
  To download click the link given bellow:

                                                       DOWNLOAD LINK!